Green Home Outfitters, Environmentally Safe, Non-Toxic Paint, Concrete Stains, Cleaning Supplies and Eco-Friendly Household Items.

You are here: Home > Flooring > Bamboo

BAMBOO FLOORING EcoTimber® bamboo flooring is made from bamboo plantations - not from wild habitats. Bamboo is a highly renewable resource, harvestable only four to six years after being planted. Its low moisture absorption properties make it ideal for humid climates and applications where moisture might pose a challenge for other types of flooring. EcoTimber Bamboo flooring is made with a Low-VOC adhesive that easily meets the strict European E1 standard for indoor air quality. There are currently dozens of bamboo flooring manufacturers, some of which have flooded the market with poorly made products. See what sets ours apart.

Solid Bamboo Flooring is composed entirely of Bamboo. These 3-5/8"-wide planks can be nailed to plywood or glued to concrete subfloors.

Engineered Bamboo Flooring consists of a sandable wear layer of Bamboo on top of a backing made of plantation Pine and Fir. This can be nailed to plywood, glued to concrete, or floated. Please call or email for freight quote on flooring items. email 1.830.833.5948

Not All Bamboo Flooring Is The Same

Avoid Problems - Make Sure That Your Bamboo Flooring is Well-Manufactured

Bamboo is a reliable flooring product, but only if it is made well by an experienced manufacturer using quality stalks, adhesives, and milling equipment. The Bamboo flooring market has been flooded in recent years with poorly manufactured material.

What to Look for in Quality Bamboo Flooring:

Raw Material – Many Bamboo flooring mills purchase immature Bamboo stalks, and do not take the time and care required to dry the raw Bamboo properly. EcoTimber’s mill uses only top-quality mature stalks, and then painstakingly processes the Bamboo with methods proven through years of research and experience. Careful oversight throughout the process ensures optimum performance.

Adhesives – Many mills use poor-quality adhesives, often-made right there at the mill. These glues may not resist water well and may contain high levels of urea-formaldehyde, which off-gases in the home. EcoTimber Bamboo flooring is made with a quality low-VOC European adhesive that falls far below the strict European E1 standard for indoor air quality.

Milling/Equipment – Look at the end of a cut sample of Horizontal Grain Bamboo flooring. With most brands, you will see small splits or gaps between the individual strips of Bamboo that have either been filled with adhesive or left as is. Some of the individual strips are not cut into perfect rectangles. With EcoTimber Bamboo flooring, all of the strips are cut perfectly and laminated tightly together, ensuring minimum opportunity for movement and delamination.

Many Bamboo importers source their flooring from a variety of mills. EcoTimber’s Bamboo flooring comes from just one mill that uses new, state-of-the-art European machinery. EcoTimber Bamboo flooring adheres to these precise milling tolerances: width +/- 0.1mm, length +/- 1mm, thickness +/- 0.1mm.

Drying - Most Bamboo flooring mills only kiln-dry their material down to 9-10% moisture content, which makes the flooring unreliable for use in dry climates and areas with significant seasonal humidity fluctuations. EcoTimber Bamboo flooring is dried to 6-8% MC, making it more stable and suitable for a wide range of climates.

Lengths – Bamboo mills sort their raw material, reserving the best pieces for their longer-length planks. Most manufacturers sell ~3 ft. and ~6 ft. lengths, using the straightest, densest material for the 6 ft. planks, which they often refer to as “Premium” grade. EcoTimber utilizes the 6 ft. lengths exclusively.

Finish – EcoTimber Prefinished Bamboo flooring uses a high-tech aluminum oxide enhanced acrylated urethane system with a hardened acrylic anti-scratch topcoat that outperforms most finishes in abrasion and scratch-resistance tests.